geral@quimial.pt
221 101 346911 947 352

Amorphous Phosphating for Multi-metals and Galvanized Iron, Aluminum

Our products comply with all the requirements of the respective QUALISTEELCOAT directives.

 

Manganese Phosphate

Manganese phosphating products that can obtain a high weight gray /black cover weight (greater than 6 g/m2 and up to 25 g/m2), necessary to absorb lubricants, in multiple processes induce or protective oils, allowing to develop the treated part the highest trican performance.

Request Information

Galvanized microcrystalline/nanometric treats

Products for treatment of galvanized with microcrystalline process that provide the highest possible quality of pretreatment before painting, due to the extreme fineness and special composition of the micro crystals (less than 10μm) that form the phosphate cover. This technology allows to reach and exceed the 1,000 hours of saline fog chamber in hot or cold galvanized parts together with paint, being especially suitable for outdoor applications that must withstand harsh weather conditions and the process can work at anbiente temperatures or at 60 ºc

Request Information

Nanotechnological Conversion (Nanometric)

Nanotechnological phosphating products that achieve a high coat weight (greater than 6 g / m2 and up to 25 g / m2), necessary to absorb lubricants, in multiple indussabões processes or protective oils, allowing to develop to the treated part the highest three.

Request Information

Nanotechnology Degreasing Without Phosphates

Crystalline phosphate products that achieve a high coating weight (greater than 6 g / m 2 and up to 25 g / m 2), necessary to absorb lubricants, in multiple indussabões processes or protective oils, allowing to develop to the treated part the highest three.

Request Information

Nanotechnology Conversion Treatment

Products for the conversion of Steel, Aluminum, Electroplated plates, Hot galvanized steel for a previous treatment in the painting of short lines.

Request Information

Concentrated Surfactants Suitable for Immersion and Aspersion

Surfactants concentrated for spraying at temperatures ˂ 50 ° C to improve yield of the different phosphatization processes described above.

Request Information

Disincrustation and Cleaning of Painting Facilities (Tunnels)

Wide range of descaling and auxiliary products for the preventive maintenance of phosphating installations

Request Information

Chemical Degreasing

Degreasers for immersion phosphating or technologically complex processes that require an independent high efficiency chemical degreasing step capable of providing maximum cleaning of the treated parts

Request Information

Degreasing Additives

Complementary additives based on phosphates in degreasing processes – amorphous phosphating, which achieve the perfect cleaning of the treated parts while developing an excellent phosphate coating. This synergy forms the main basis for the high flexibility and quality of the degreasing processes – phosphating.

Request Information

Passivation for Iron and Aluminum

Also known as sealing products. Range of products for the sealing of the inter-crystalline pores of the phosphate layers prior to the painting step, significantly improving the corrosion resistance of the phosphate-paint assembly, even reaching double.

Request Information

Tuners, Accelerators and Levelers

Additives for improving yield of the different phosphatization processes described above.

Request Information

Crystalline Phosphating

Crystalline phosphate products that achieve a high coating weight (greater than 6 g / m 2 and up to 25 g / m 2), necessary to absorb lubricants, in multiple indussabões processes or protective oils, allowing to develop to the treated part the highest three.

Request Information

Microcrystalline Phosphating

Microcrystalline phosphating products that provide the highest possible pretreatment quality prior to painting due to the extreme fineness and special composition of micro crystals (less than 10μm) that form the phosphate layer. This technology allows to reach and surpass the 1,000 hours of saline fog chamber for the phosphate-painting set, being especially indicated for exterior applications that must withstand rigorous meteorological conditions

Request Information

Degreasers with Amorphous Phosphating with High Layer Weight

Product range developed for ferrous-based amorphous phosphating by projection and immersion offering a medium-high corrosion resistance, ideal for interior and exterior part applications

Request Information

Degreasers with Amorphous Phosphating Amorphous Application (Steam-Jet)

Product range developed for amorphous ferrous-based phosphation by boom projection (Steam-Jet) which offer medium-high corrosion resistance, ideal for applications of interior and exterior parts

Request Information

Degreasers with Multimetal Phosphating with High Fluoride Content

Product range developed for amorphous base phosphating (Aluminum, galvanized – HDG and Electrozinc – EG), by projection and immersion that offer a medium to high corrosion resistance, ideal for applications of the parts for interior and exterior.

Request Information

Degreasers with Multimetal Amorphous Phosphating

Product range developed for amorphous phosphating (Multimeters). By projection and immersion offering a medium-high corrosion resistance, ideal for applications of interior and exterior parts

Request Information

Degreasers with Amorphous Phosphating

Product range developed for amorphous base (Ferrous) phosphating by projection and immersion that offer a medium-high corrosion resistance, ideal for applications of interior and exterior parts

Request Information

Degreasing additives and attack inhibitors

Degreaser additives that can be used in multiple industrial processes. These additives in their correct application provide different properties to look for, such as: a high cleaning power and also a temporary protection against corrosion.

Request Information

Additives to regulate the flutes of Phosphating baths***

Additives to regulate the fluorides of the phosphatizing processes, thus improving the performance of the different processes of the same (phosphating).

Request Information

Alkaline additives to regulate pH of nanotech conversion baths**

Additives to regulate the pH of the conversion processes, allowing an improvement in the performance of the different nanotechnological conversion processes.

Request Information

Additives for reducing acid consumed in phosphating baths*

Additives for the control of acids consumed in the treatment processes, thus improving the yield of different phosphatization processes.

Request Information

Alkaline additives to regulate Phosphate bath pH

Additives developed to correct the pH and to improve the performance of the different phosphatizing processes.

Request Information

Non-chromic passivation without posterior washing

Developed additives also known as sealing products. The use of these products allows an improvement of the property of the process which provides an optimization and a good yield of these steps, which in turn contribute to the creation of a seal of the inter-crystalline pores of the phosphate layers before the painting step. This range Allows a significant improvement in corrosion resistance.

Request Information

In addition to the products on our website, we offer many more. Consult us through our email geral@quimial.pt.